|
|
Post by NamelessStain on Feb 2, 2017 14:58:57 GMT
Yea, there's a truck spot right across from where I work, so I'll check them. Also the radio place, that sent me to a place to get the bracket made, does antennae tuning.
|
|
|
|
Post by LowKey on Feb 2, 2017 18:25:56 GMT
Excellent.
I'm not saying you should break any rules, but if an emergency should arise it might be nice to be able to turn the volume up to 11.
|
|
|
|
Post by NamelessStain on Feb 6, 2017 15:28:29 GMT
CB wired and antenna is installed. Wires run for the rear 12v plugs (holes not cut yet for 12v hardware). Fuse box installed in dash glove box. Still awaiting some grommets from Amazon before I can run power through the firewall.
|
|
|
|
Post by NamelessStain on Feb 10, 2017 12:18:52 GMT
Can anyone get this made into an 8x10 sticker for my FJ? buffetoblog.files.wordpress.com/2014/03/its-a-jeep-thing-you-wouldnt-understand1.jpgGrommets and new light bar came in. I decided to go a different route with the roof mounted light bar to try to keep it closer to the roof to avoid branches and overhead items. I grabbed a 51" light bar for the roof. Is 22,000 lumens too much? NEVER!! Moving some other lights around, will update original post. I should be working on getting power into the fuse box and wiring up lights this weekend. Depending on time, I may try to put the 12v outlets in the back of the cargo area. |
|
|
|
Post by NamelessStain on Feb 20, 2017 11:50:52 GMT
Well this weekend I got power to the light bar and power to the fuse box. Tried installing the switches in the left side of the dash, but it was too shallow to hold the switches. Will update first post.
|
|
|
|
Post by NamelessStain on Apr 3, 2017 13:52:59 GMT
Waiting on tax money, then the updates should begin again  |
|
|
|
Post by NamelessStain on Jun 7, 2017 13:16:10 GMT
|
|
|
|
Post by scbrian on Jun 7, 2017 14:41:01 GMT
Damnit, POST PICTURES MAN!!
|
|
|
|
Post by NamelessStain on Jun 7, 2017 15:36:31 GMT
We will... soon.
|
|
|
|
Post by NamelessStain on Aug 7, 2017 13:48:52 GMT
|
|
|
|
Post by NamelessStain on Aug 16, 2017 14:43:21 GMT
I called the bumper guy last night. He said it will probably be here the week after labor day weekend. We got to chatting and he said he has 12 in production right now. So I asked if the rock sliders he makes are as backed up. He said he only has 2 orders for them now and they get done in about 2-3 weeks. So once I get the bumper, and if it looks good, I will probably order rock sliders. Yea, I know. Not enough rocks in this area, but my BOL has more than enough  Also need to see if this will fit in the back. Much cheaper than the ARB product and will do what I need it to do. www.northerntool.com/shop/tools/product_200497001_200497001 |
|
|
|
Post by NamelessStain on Sept 12, 2017 14:33:09 GMT
Ordered the Lift Kit and new UCAs:
toyteclifts.3dcartstores.com/3-Lift-W-Bilstein-5100-Front-Coilovers-FJ4RunnerGX_p_365.html
toyteclifts.3dcartstores.com/25480--SPC-Adjustable-Upper-Control-Arms-for-FJ-Cruiser-03-Current-4Runner-and-03-Lexus-GX470GX460_p_196.html
|
|
|
|
Post by NamelessStain on Sept 15, 2017 14:40:31 GMT
|
|
|
|
Post by NamelessStain on Sept 21, 2017 11:00:24 GMT
Lift kit arrived yesterday. I need to put the bumper on first (still waiting for it to be delivered) since the lift kit I purchased takes into account an additional 150# on the front end. A friend said he has a spring compressor that I can borrow. So right now the schedule for upgrades is: 9/30-31 - Bumper and winch. 10/7-8 - lift kit, UCAs 10/14 - tires, body chop modification, tire alignment. Sometime between 9/30 and 10/7 I'll order tires. Also, I put one of the two 12v power outlets in the back cargo area. Currently I have it hidden inside the jack storage area. Tested it and all is good. After all that is done, I might have to swing by SCB's place to get some photos done  Edit: updated original post. |
|
|
|
Post by NamelessStain on Sept 21, 2017 14:19:07 GMT
|
|
